NEW: E-Learning-Package for Automotive Basic Software Developer

E-Learning-Package for Automotive Basic Software Developer

Benefit from continuous education with high-quality training in the field of basic software development for the automotive industry.

With the package of e-learning courses, you benefit from didactically excellently designed specialist topics on cyber security in the automotive sector, encryption methods, basic software development for embedded systems including, serial bus systems, operating system, real-time operating systems as well as AUTOSAR™ and ASPICE.

TARGET GROUP

The program is aimed at all those involved in the development of basic software in the automotive environment.

Developers, engineers, software engineers and software project managers of automotive basic software BSW

PREREQUISITES

No special technical knowledge is required. However, depending on the depth of your previous knowledge, you should allow more time for learning.

DURATION

Continuous training over a period of 📅 12 months

CERTIFICATE OF ATTENDANCE

You will receive a certificate for each completed e-learning course within the overall package. The respective certificate can be downloaded from the website after completion of each course.

AGENDA

We recommend continuous training in the following sequence:

• Module 1: Embedded Software Basics
• Module 2: Serial Bus Systems
• Module 3: Automotive Bus Systems
• Module 4: Cyclic Redundancy Check CRC
• Module 5: Operating System OS
• Module 6: Real-Time Operating System RTOS
• Module 7: AUTOSAR
• Module 8: Electronics and Electrical Fundamentals
• Module 9: Automotive SPICE - An Overview
• Module 10: Automotive SPICE - Engineering
• Module 11: Automotive SPICE - Supporting Processes
• Module 12: Information Security
• Module 13: Automotive Cybersecurity
• Module 14: Cryptography

CONTENT OF THE MODULES IN DETAIL

The training is composed of several e-learning courses. The following courses are included in this package:

Module 1: Embedded Software Basics

Content: 1 hour and 15 minutes, estimated study time: 6 hours and 15 minutes

Fixed Point Arithmetic

• Storage of numbers in memory
• Value range and accuracy
• Error possibilities
• Mathematical representation and conversion
• Arithmetic operations
• Advantages and disadvantages of fixed point arithmetic

Floating Point Arithmetic

• Exponential representation
• Single and double
• Storage of numbers in memory
• Value range
• Error possibilities and exceptions
• Advantages and disadvantages fixed point arithmetic

Module 2: Introduction to Serial Bus Systems

Content: 2 hours and 50 minutes, estimated study time: 6 hours and 15 minutes

Basic Terms

• Motivation (the term bus, typical applications, real time, serial vs. parallel transmission).
• Transmission path (simplex/duplex, bit rate, baud rate, clock signal, communication models, latency, payload and control data)
  protocol (structure, principles, protocol stack)
• System components (router, gateway, switch and repeater)

OSI-Model

• Motivation, mode of operation and basic model structure
• Transport-oriented layers and their tasks
• Application-oriented layers and their tasks

Physical Layer

• Different types of transmission media
• Basic structure and examples of connectors
• Binary representation (endianness, bit significance and different codings)

Data Link Layer

• Communication Process: synchronous and asynchronous serial communication, routing schemes, topologies
• Possibilities for secure data transmission, e.g. parity bit
• Different access control methods

CRC Basics

• Usage and definition
• Explanation of the generator polynomial
• Calculation of the CRC using two examples

Module 3: Automotive Bus Systems

Content: 45 minutes, estimated study time: 3 hours and 45 minutes

SENT – Single Edge Nibble Transmission

• General Information
• Concept
• Structure
• Data example

Module 4: Cyclic Redundancy Check CRC

Content: 1 hour and 20 minutes, estimated study time: 6 hours and 40 minutes

CRC Definition

• Meaning of the term CRC
• Benefits and use cases of CRC
• Different lengths of CRC
• Principle: Basic operation, polynomial representation, generator polynomial
• Illustration of the functioning by means of an example with CRC-5

CRC-8

• Calculation of the CRC-8 with two examples
• Generating the CRC-8 on the sender side
• CRC at receiver side: calculations if message is correct or incorrect
• First example: Message with one byte
• Second example: Message with two bytes

CRC-16

• Two examples
• Generating the CRC-16 on the transmitter side
• CRC-16 at the receiver
• First example: Message with two bytes
• Second example: Message with three bytes

Module 5: Operating System OS

Content: 55 minutes, estimated study time: 4 hours and 35 minutes

• General Introduction
• Kernel
• Multitasking
• Safety and other Advanced Aspects
• Embedded OS

Module 6: Real-Time Operating System

Content: 1 hour and 5 minutes, estimated study time: 5 hours and 25 minutes

• General Introduction
• Revision
• Characteristics
• Tasks
• Scheduling
• Typical Problems

Module 7: AUTOSAR

Content: 3 hours and 50 minutes, estimated study time: 19 hours and 10 minutes

Overview

• General Introduction
• AUTOSAR™ Organization
• AUTOSAR™ Standard

Classic Platform R19-11

• Overview
• Methodology
• Software Architecture

Virtual Functional Bus

• General Introduction
• Example
• Components

Virtual Functional Bus – Basic Principles

• Revision
• Port Interfaces
• Ports
• Connectors
• Software Architecture

Operating System

• Revision
• AUTOSAR OS

Module 8: Electronics and Electrical Fundamentals

Content: 3 hours and 10 minutes, estimated study time: 15 hours and 50 minutes

• Electronics and Magnetism
• Important Components and Principles
• Circuits
• Alternating Current Circuits
• Basics of Power Electronics

Module 9: Automotive SPICE PAM V3.1 / V4.0 - An Overview

Content: 1 hour and 35 minutes, estimated study time: 7 hours and 55 minutes

• Reasons for the introduction of Automotive SPICE
• Relation to other standards
• How does Automotive SPICE work?
• Example: MAN.3 project management

Module 10: Automotive SPICE PAM V3.1 - Engineering

Content: 2 hours and 50 minutes, estimated study time: 14 hours and 10 minutes

System Engineering Processes

• 1: Requirements Elicitation
• 2: System Requirements Analysis
• 3: System Architectural Design
• 4: System Integration and Integration Test
• 5: System Qualification Test

Software Engineering Processes

• 1: Software Requirements Analysis
• 2: Software Architectural Design
• 3: Software Detailed Design and Unit Construction
• 4: Software Unit Verification
• 5: Software Integration and Integration Test
• 6: Software Qualification Test

Module 11: Automotive SPICE PAM V3.1 - Supporting Processes

Content: 1 hour and 45 minutes, estimated study time: 8 hours and 45 minutes

• 1: Quality Assurance
• 8: Configuration Management
• 9: Problem Resolution Management
• 10: Change Request Management

Module 12: Information Security

Content: 1 hour, estimated study time: 5 hours

Introduction

• Goals of Information Security
• Extent of Information Security

Practical Realisation

• Threats
• Hazards
• Practical Implentation of Information Security

Endangerments

• Basics
• Functionality
• Safety testing

Module 13: Automotive Cybersecurity

Content: 45 minutes, estimated study time: 4 hours and 45 minutes

• Introduction
• Why Automotive Cybersecurity matters
• Upcoming Regulations and Standards
• Cybersecurity in the Product Life Cycle
• Cybersecurity Threat Analysis, Risk Assessment and Treatment
• Cybersecurity Controls and Requirements
• Cybersecurity Verification and Validation Testing

Module 14: Cryptography

Content: 4 hours, estimated study time: 20 hours

Classical Cryptography

• Cryptography Basics
• Scytale
• Caesar Cipher
• Vigenère Cipher
• One-Time Pad
• Enigma

Modern Cryptography

• Who are Alice and Bob?
• Symmetric Encryption
• Asymmetric Encryption
• Hybrid Encryption
• DES (Data Encryption Standard)
• AES (Advanced Encryption Standard)
• Diffie-Hellman Key Exchange
• RSA