ACS Gas Safety Core Domestic Re- Assessment
Starting dates and places
Description
Qualifications
• CCN1 Initial or re-assessment
• GAS COOKERS – CKR1
• GAS FIRES/HEATERS – HTR1*
• CENTRAL HEATING/WATER HEATERS CENWAT*
(Central Heating CEN1 & Water Heating WAT1 replaced with
CENWAT April 2011)
• UNVENTED HOT WATER (for the Installer)
• UNVENTED HOT WATER (for the Non Installer)
• WATER REGULATIONS (for the Installer)
• WATER REGULATIONS (for the Non Installer)
• ENERGY EFFICIENCY (Part L)
• GAS METERS (MET)
CPA1 COMBUSTION PERFORMANCE ANALYSIS (now mandatory for
operatives commissioning/servicing gas fires/heaters and central
heating/water heaters)
Content
• Gas Safety Legislation.
• Gas Emergency Actions and Procedures.
• Products & Characteristics of…
Frequently asked questions
There are no frequently asked questions yet. If you have any more questions or need help, contact our customer service.
Qualifications
• CCN1 Initial or re-assessment
• GAS COOKERS – CKR1
• GAS FIRES/HEATERS – HTR1*
• CENTRAL HEATING/WATER HEATERS CENWAT*
(Central Heating CEN1 & Water Heating WAT1 replaced with
CENWAT April 2011)
• UNVENTED HOT WATER (for the Installer)
• UNVENTED HOT WATER (for the Non Installer)
• WATER REGULATIONS (for the Installer)
• WATER REGULATIONS (for the Non Installer)
• ENERGY EFFICIENCY (Part L)
• GAS METERS (MET)
CPA1 COMBUSTION PERFORMANCE ANALYSIS (now mandatory for
operatives commissioning/servicing gas fires/heaters and central
heating/water heaters)
Content
• Gas Safety Legislation.
• Gas Emergency Actions and Procedures.
• Products & Characteristics of Combustion.
• Ventilation.
• Installation of Pipework and Fittings.
• Testing for Tightness.
• Checking and/or Setting Meter Regulators.
• Identification of Unsafe Situations and the Use of Emergency
Notices and Warning Labels.
• The Operation of and Positioning of Emergency Isolation
Controls and Valves.
• Checking and Setting Appliance Burner Pressures and Gas
Rates.
• The Operation and Checking of Appliance Gas Safety Devices and
Controls.
• Chimney Standards.
• Chimney Testing.
• Installation of Open, Balanced and Fan Assisted Chimney
Configurations
• Re-establish Existing Gas Supply and Relight Appliances.
How you will gain the qualification
The assessment is designed to test that candidate has achieved the desired level of knowledge and skills to be deemed competent in a particular area of work. Therefore all assessment is undertaken in the controlled Gas Assessment Centre. On successful completion of the assessment, the candidate will be issued with a BPEC certificate.
What qualifications you need
• Qualified to Level 3 in Plumbing & Heating e.g. C&G 6129 & 6089, or equivalent.
Where to next
Share your review
Do you have experience with this course? Submit your review and help other people make the right choice. As a thank you for your effort we will donate £1.- to Stichting Edukans.There are no frequently asked questions yet. If you have any more questions or need help, contact our customer service.