CCNA Boot Camp (5 days)

Prerequisites:

Prior to attending CCNA Bootcamp, you should be very familiar with networking topics such as TCP/IP, IP configuration, peer-to-peer networking, subnetting, building a routing table, and other network protocols, standards, and architecture.

If you're new to networking and to Cisco IOS, consider taking the ICND1 and ICND2 classes instead of this bootcamp. We strongly encourage career changers and people new to internetworking to gain the foundation knowledge needed by taking Network+.

Course Description:

Based on the Authorized Cisco ICND1 and ICND2 courses, our CCNA Boot Camp provides a proven and intense program to help you achieve your CCNA certification. There is also an 8-day version available.

The need for highly skilled network professionals continues to remain steady. The CCNA designation is recognized as an important stepping stone for network professionals on their way to a successful career in the Cisco internetworking field.

Achieving CCNA certification benefits both you and your employer because of the close relationship between CCNA program goals and the fundamental job skills necessary to work in network support or to adapt to Voice over IP.

Every student is eligible for our guarantee, the best available, to make sure you achieve your goals.

Individuals who possess a general networking background, have some experience with Cisco IOS, and are seeking CCNA® certification should consider this class as the quickest way to meet the requirements of the CCNA exam.

Pre-Class Activity, Classroom Instruction, Post-Class Lab Practice, The Pre-Class Activity provides you with approximately ten hours of review materials and exercises, including a pre-test assessment, Self-Paced e-Learning content, and a readiness test, all designed to give you a firm foundation and get you focused and prepared to get the most out of Classroom Instruction.

Classroom Instruction includes intensive instructor-led training and hands-on labs where you'll learn to install, configure, operate, and troubleshoot medium-sized routed and switched networks. You'll also learn the basics of wireless networking as well as mitigating security threats. During Classroom Instruction, you'll have 24-hour lab access.

Please note: The CCNABC is an accelerated programme that delivers 10 days of training in 5. As a result the start and finish times may vary dependent on delegate skills / experience and speed of learning but typically will start at 9am and may extend to 7pm in the evening.

This course includes the following modules:

Course Topics:

• Basic networking vocabulary, components, and concepts
• Binary, decimal, and hexadecimal numbering
• Switching operations and theory
• TCP/IP network addressing and routing
• IP subnetting
• Providing Local Area (LAN), Wide Area (WAN), and remote access services
• Introduction to Cisco Internet Operating System (IOS)
• Initial configuration of Cisco Catalyst Switches and Routers
• Network discovery and management using Cisco Discovery Protocol (CDP), telnet, and Trivial FTP (TFTP)
• Review of IP subnetting
• Interconnect networks using TCP/IP
• Dangers of redundant switching
• Spanning Tree
• Concepts of VLANs and trunking
• Distance vector routing protocols
• Link state routing
• Learn about and configure RIP
• Investigate IGRP and compare IGRP to EIGRP
• Use VLSM
• Use access lists
• Configure NAT and PAT
• Point-to-point serial encapsulation
• Configure PPP, CHAP, and PAP
• Frame Relay operation
• Differences between BRI and PRI
• Configure DDR across ISDN BRI

ICND1

• Building a Simple Serial Network
• Building a Simple Ethernet Network
• Expanding the Network
• Connecting Networks
• Constructing Network Addresses 6. Ensuring the Reliability of Data Delivery
• Connecting to Remote Networks
• Operating and Configuring Cisco IOS Devices
• Managing Your Network Environment

ICND2

• Configuring Catalyst Switch Operations
• Extending Switched Networks with VLANs
• Determining IP Routes
• Managing IP Traffic with Access Lists
• Establishing Serial Point-to-Point Connections
• Establishing Frame Relay Connections
• Completing ISDN Calls